滚珠丝杆对于机床设备的作用是非常巨大的，一旦它出现故障的话就会导致机床不能正常工作。所以我们平时在使用的过程中一定要加强对滚珠丝杆的检测，来应对它变化多样的故障问题。下面介绍的是日常使用中滚珠丝杆维修经常会碰到的问题以及检测的方法。

The role of ball screw in machine tool equipment is very significant, and once it malfunctions, it can cause the machine tool to malfunction. So we must strengthen the detection of the ball screw in our daily use to deal with its diverse fault problems. The following is an introduction to the common problems and detection methods encountered in the maintenance of ball screw in daily use.

创盈彩网址检测支撑系统和滚珠丝杆有时候是会存在一定的间隙的，间隙的存在会对机床的定位精度、反向误差造成直接的影响，如果当出现上述问题的时候我们可以用百分表和钢球搭配使用来检测两者之间的间隙。

Sometimes there is a certain gap between the detection support system and the ball screw, which can directly affect the positioning accuracy and reverse error of the machine tool. If the above problems occur, we can use a dial gauge and a steel ball in combination to detect the gap between the two.

具体方法是：将钢球放在滚珠丝杆一端上面的中心孔里面，看一下它轴向窜动的情况，与此同时用百分表来检测机床工作台的移动情况。滚珠丝杆的正反两面都是要检测的，检测的方法都是一样，但是每次检测的时候都要将百分表上面的数值记录下来，然后做一下比较，这样就可以大致确认滚珠丝杆故障出现的位置了。

The specific method is to place the steel ball in the center hole above one end of the ball screw, observe its axial movement, and at the same time use a dial gauge to detect the movement of the machine tool workbench. The front and back sides of the ball screw need to be tested, and the testing method is the same. However, during each test, the value on the dial gauge should be recorded and compared to roughly confirm the location of the ball screw fault.

创盈彩网址那么，当轴承、丝杆螺母副的润滑性降低的时候要如何检测呢?对于经验比较丰富的老师傅来说，机床在工作过程中发出的声音就可以辨别润滑的状况，如果润滑状况很差的话机床还会发生很大的颤动。这种状况一般会发生在使用时间比较久的老机床身上，对于新买的机床是不会出现这种问题的。因为老机床在长期使用过程中会有积累一定的灰尘堵塞自动润滑系统。

创盈彩网址So, how should we detect when the lubrication of bearings and screw nut pairs decreases? For experienced teachers, the sound produced by the machine tool during operation can distinguish the lubrication condition. If the lubrication condition is poor, the machine tool will also experience significant vibration. This situation usually occurs on old machine tools that have been in use for a long time, and this problem will not occur on newly purchased machine tools. Because old machine tools may accumulate a certain amount of dust to block the automatic lubrication system during long-term use.

感谢您的阅读，此文的文章来源：导轨丝杠更多的内容和问题请点击：http://tianboo.net我们会继续努力的为您提供服务，感谢您的支持！

创盈彩网址Thank you for reading. The source of this article is Guide Screw. For more information and questions, please click: http://tianboo.net We will continue to work hard to provide you with services. Thank you for your support!