How to effectively isolate the noise generated by the linear guide rail? Because the machinery will inevitably produce very uncomfortable noise in the production and operation, if the noise is reckless for a long time, it will form noise pollution; in the face of noise, we can only let it continue to produce, however, after a long period of months, the guide rail screw manufacturers have summed up how to effectively block the noise?

　　我们常规控制噪声污染的原则是:的原则治理噪声之前到达耳膜,减震、隔音、吸音、布局和建设等措施,来降低声源的振动,吸收声能的传播,或壁垒保持良好的全部或部分,以达到降噪的效果。机械噪声隔离，请参考以下方法:

　　The principle of our routine control of noise pollution is as follows: before the control of noise, measures such as reaching the eardrum, shock absorption, sound insulation, sound absorption, layout and construction will be taken to reduce the vibration of the sound source, absorb the spread of sound energy, or keep a good part or all of the barriers, so as to achieve the effect of noise reduction. For mechanical noise isolation, please refer to the following methods:

　　(1)传输路径降噪

　　(1) Transmission path noise reduction

　　(2)减少噪声源

　　(2) Reduce noise sources

　　(3)受音器或者器官的噪声保护

　　(3) Noise protection of receivers or organs

　　(4)减少传播路径中的噪声，控制噪声传播，改变噪声源已经发出的噪声传播路径，如采取吸声、隔声、隔声、隔振等措施，以及合理规划城市和建筑布局。

　　(4) Reduce the noise in the propagation path, control the noise propagation, change the noise propagation path that the noise source has sent out, such as taking measures of sound absorption, sound insulation, sound insulation, vibration isolation, etc., and reasonably plan the urban and architectural layout.

　　(5)为减少噪声源，工业和交通运输可以选择低噪声的生产设备，改进生产工艺，或改变噪声源的运动方式(如阻尼、隔振等措施，以减少固体声音的振动)。

　　(5) In order to reduce noise sources, industry and transportation can choose low-noise production equipment, improve production technology, or change the movement mode of noise sources (such as damping, vibration isolation and other measures to reduce the vibration of solid sound).

　　(6)噪音保护声音接收器或声音的器官,如果不能采取措施在声源和传播路线,或者如果声学措施仍不能达到预期的效果,有必要对声音接收机采取保护措施或声音的器官,如戴耳塞、耳罩或首饰工人暴露于长期职业噪声

　　(6) Noise protection sound receivers or organs of sound, if measures cannot be taken at the sound source and transmission route, or if the acoustic measures still fail to achieve the expected effect, it is necessary to take protective measures or organs of sound for sound receivers, such as earplugs, earmuffs or jewelry workers exposed to long-term occupational noise

　　然而,我们想要解决线性导轨的噪音我们建议我们可以开始从线性导轨的光滑油:(1)没有和单向滚针轴承相同的操作,尽可能延迟保护时期,缩短停机时间,提高劳动生产率。(2)在dn > 5×105高速运行时，应保证电机温升低，不甩油，以降低功耗，保护电机。(3)其纯量含量控制在一定的范围内，更大限度的降低设备噪声对铝合金铸件的污染。(4)在超低温工作的前提下，保证单向滚针轴承的启动和运行的智能化。单向滚针轴承常见问题。保证更小输出功率。

　　However, if we want to solve the noise of linear guide rail, we suggest that we can start from the smooth oil of linear guide rail: (1) without the same operation as one-way needle roller bearing, delay the protection period as much as possible, shorten the downtime and improve the labor productivity. (2) When DN > 5 × 105 is running at high speed, it should be ensured that the temperature rise of the motor is low and the oil is not shed, so as to reduce the power consumption and protect the motor. (3) Its pure content is controlled in a certain range to minimize the pollution of equipment noise on aluminum alloy castings. (4) Under the premise of ultra-low temperature operation, the intelligent start-up and operation of one-way needle roller bearing is guaranteed. Common problems of one-way needle bearing. Ensure the minimum output power.

　　以上是导轨丝杠厂家为大家介绍的相关内容，想要了解更多内容，欢迎访问网站：http://tianboo.net

　　The above content is introduced by the guide screw manufacturer. For more information, please visit the website: http://www.jgongrun.com